The POC 2500 is available in electric or air versions and can be activated by any electric, gasoline, hand, battery, or air operated hydraulic pump capable of developing 10,000 psi and having free flow return through the pressure line. The pumps are then hose-connected to the Hydrashear body.
The POC 2500 can cut as many pieces of wire rope as can be gathered into the shearblade (designed to accept up to and including 2 1/2″ diamter Super Plow steel wire rope.)
Optional mounting of POC 2500: Mounted on a base plate and skids for shipping. Dimensions: steel base palte 13 1/2″ wide x 42″ long; overall height 21″. Power: 1.7hp; 115 or 230 volt; 50/60 HZ motor.
POC 2500有电动或气动两种型号，可由任何电动、汽油、手动、电池或气动液压泵驱动，其压力可达10，000磅/平方英寸，并可通过压力管路自由回流。然后，泵通过软管连接到液压剪主体上。
POC 2500可以切割尽可能多的钢丝绳碎片，并将其收集到剪切刀片中(设计用于接受直径高达2 1/2”的超级犁钢丝绳。)
POC 2500的可选安装:安装在底板和运输滑轨上。尺寸:钢底板13 1/2”宽×42”长；总高度21英寸。功率:1.7马力。115或230伏；50/60 HZ电机
