Honeywell V8043F1036 3/4" Sweat Connection two-way on-off low voltage motorized zone valve with 3.5 Cv capacity and a screw terminal block electrical connections, consists of an actuator and valve assembly for controlling the flow of hot water. It has a manual opener for valve operation on power failure; Valve returns to automatic position when power is restored.
Honeywell Zone Valves were designed for cycling (not constantly powered on) applications. Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water.
Description:
Motorized Zone Valve
Type 2-Way, Straight-Through
Nominal Size 3/4 Inch
End Connection Soldered x Soldered
Actuation Type 2-Position, Spring Return to Close
Valve Position Normally Closed
Body Material Brass
Valve Timing 15 Second (Open)
Input Supply Rating 7.7 Volt Amp at 24 Volt AC 50/60 Hertz 0.32 Amp
Temperature Rating 50 to 200 Deg F (Fluid)
Pressure Rating 20 PSI (Close-Off), 125 PSI (Static)
Media Handled Hot Water
Inclusions/Features Low Voltage, Manual Opener, SPST End Switch
Application Hydronic Control
Applicable Standard UL, CSA
Overall Dimension 3-1/2 Inch Width x 2-3/8 Inch Depth x 4 Inch Height
Flow Capacity 3.5 Cv
Electrical Connection 18 Inch Lead
Material Brass (Seat), Stainless Steel (Stem), EPDM Rubber (Packing), Buna-N Rubber Ball (Plug/Ball/Disc)
Ambient Temperature 125 Deg F
Relative Humidity Range 5 to 95 Percent (Non-Condensing)
UPC: 085267000765
Part Number: V8043F1036/U
